SIUI CTS-900 - Chapter 5: System Setup; 5.1 Operation Method for System Setup Menu; 5.2 Setup Menu and Methods

System Setup
5-1
Chapter 5
System Setup
5.1 Operation Method for System Setup Menu
Press Menu to display the system main menu on the screen. Use the touchpad or Value
control key ( and ) to select desired menu item; press Enter to enter the
submenu; Press
Esc to exit the current menu and return to the previous menu, or to exit
the main menu if it is in the main menu page. Press Menu at any menu to save changes
and exit the main menu operation. Pressing other valid mode keys or non-mode keys can
also exit the menu and enter the corresponding operation. The system menu setups
remain available after rebooting the system.
5.2 Setup Menu and Methods
5.2.1 Main Menu
Table 5-1 Main Menu
Menu Description
System Setup To set up the system
Image Setup To set up images
Peripheral Setup To set up peripheral devices
Calc and Meas Setup To set up calculations and measurements
*DICOM *DICOM
System Update To update the system
About Version Version Information
【Note】: The item with “ * ” is an optional function.