SIYI A8 mini - Page 43

A8 mini User Manual v1.5
36
2023 SIYI Technology Co., Ltd, All Rights Reserved
9
uint16_t
temp_min_x
X coordinate of the min temperature
in the box
10
uint16_t
temp_min_x
Y coordinate of the min temperature
in the box
Mark:
1. Thermal camera supports digital zoom, the temperature measuring box will zoom in and out according to
the digital zoom. Under digital zoom, the temperature measuring range should refer to the box responded
by the camera.
2. Read temperature of a box command is only available for ZT30 at this moment.
Read Temperature of the Full Screen
CMD_ID:0x14------Read Temperature of the Full Screen
Send data format
No.
Data Type
Data Name
Description
1
uint8_t
get_temp_flag
0: Turn off temperature measuring
1: Measure the temperature once
2: Continuous temperature measuring
at 5 Hz
ACK data format
1
uint16_t
temp_max
Max temperature of the full screen /
100 (two decimal places)
2
uint16_t
temp_min
Min temperature of the full screen /
100 (two decimal places)
3
uint16_t
temp_max_x
X coordinate of the max temperature
in the full screen
4
uint16_t
temp_max_y
Y coordinate of the max temperature
in the full screen
5
uint16_t
temp_min_x
X coordinate of the min temperature
in the full screen
6
uint16_t
temp_min_x
Y coordinate of the min temperature
in the full screen
Mark: Read temperature of the full screen is only available for ZT30 at this moment.
Read Range from Laser Rangefinder
CMD_ID:0x15------Read Range from Laser Rangefinder
Send data format
No.
Data Type
Data Name
Description
ACK data format
1
uint16_t
info_type
Range from Laser Rangefinder
low byte in the front, high byte in the
back
Minimum value is 50
Data unit is dm
Mark: Read range from laser rangefinder is only available for ZT30 at this moment.