A8 mini User Manual v1.5
52
2023 SIYI Technology Co., Ltd, All Rights Reserved
Above tools should be made by customers at this moment.
Please refer to the below picture for pinouts and diagram.
SIYI will provide a standard cable to support the direct connection between PX4 / Ardupilot
flight controller and SIYI gimbal. Welcome to follow our product updates!
⚫ Mission Planner
Mark
Above software can be downloaded from Mission Planner official link.
Steps
1. Power SIYI gimbal camera and flight controller.
2. Connect gimbal camera’s UART port to flight controller’s UART port and make
sure they are communicating with each other.
3. Run ground station and set the following parameters.
To Next Page
Loading...
