SIYI A8 mini - Page 60

A8 mini User Manual v1.5
53
2023 SIYI Technology Co., Ltd, All Rights Reserved
The params below assume the autopilot’s TELEM1 port is used for instance.
⚫ SERIAL1_PROTOCOL to 2 (Mavlink 2)
⚫ SERIAL1_BAUD to “115” for 115200 bps
⚫ Optional: BRD_SER2_RTSCTS to “0” to disable serial flow control
⚫ MNT1_TYPE to “4” (SToRM32 MAVLink) and reboot the ardupilot
⚫ MNT1_PITCH_MIN to -90
⚫ MNT1_PITCH_MAX to 25
⚫ MNT1_YAW_MIN to -160
⚫ MNT1_YAW_MAX to 160
⚫ RC6_OPTION = 213 (“Mount Pitch”) to control the gimbal’s pitch angle with
RC channel 6
⚫ RC7_OPTION = 214 (“Mount Yaw”) to control the gimbal’s yaw angle with
RC channel 7
⚫ RC8_OPTION = 163 (“Mount Lock”) to switch between “lock” and “follow”
mode with RC channel 8
Optionally these auxiliary functions are also available.
⚫ RC9_OPTION = 166 (“Camera Record Video”) to start/stop recording of
video
⚫ RC9_OPTION = 167 (“Camera Zoom”) to zoom in and out
⚫ RC9_OPTION = 168 (“Camera Manual Focus”) to adjust focus in and out