A8 mini User Manual v1.5
90
2023 SIYI Technology Co., Ltd, All Rights Reserved
8. After a few seconds, IMU calibration will be finished.
IMU Constant Temperature Calibration
Specially designed for using gimbals in scenarios with big difference in temperature
to avoid the situation that gimbal behaves abnormally because IMU cannot reach
constant temperature normally and fast when the environment temperature is far
from IMU constant temperature.
Before calibration, please input the environment temperature of your operating field,
the software will start to calculate the target IMU constant temperature so that IMU
can reach the temperature fast after powering on gimbal camera. The software is
showing IMU temperature in real-time.
Accelerator Hexahedral Calibration
Accelerator hexahedral calibration can calibrate the accelerator’s sensitivity, zero
bias, and inter axis error, etc. During calibration, the gimbal should be placed in all
hexahedrons to record accelerator’s output value on each orientation and build the
To Next Page
Loading...
