- 10 -
951-171-016
Version 03
EN
1. Safety instructions
1.6
Unauthorized conversions or modifica-
tions may result in unforeseeable impacts
on safety. Therefore, any unauthorized
conversions or modifications are expressly
prohibited.
1.7 Prohibition of certain activities
Due to potential sources of faults that may
not be visible or due to legal regulations
the following activities may be carried out
by manufacturer specialists or authorized
persons only:
○ Repairs, changes to the drive
○ Replacement of or changes to the pistons
of the pump elements
1.8 Inspections prior to delivery
The following inspections were carried out
prior to delivery:
○ Safety and functional tests
○ In case of electrically driven products:
electrical inspections following DIN EN
60204-1:2007 / VDE 0113-1:2007.
1.9 Other applicable documents
In addition to these instructions, the fol-
lowing documents must be observed by the
respective target group:
○ Operational instructions and approval
rules
○ Safety data sheet of the lubricant used
Where appropriate:
○ Project planning documents
○ Instructions of the suppliers of purchased
parts
○ Any documents of other components
required to set up the centralized lubrica-
tion system
○ Other relevant documents for the inte-
gration of the product into the machine
or system
To Next Page
Loading...
