1
- 9 -
951-171-016
Version 03
EN
1. Safety instructions
1.3 Intended use
Supply of lubricants within a centralized lu-
brication system following the specifications,
technical data and limits stated in these
Instructions:
Usage is allowed exclusively for professional
users in the frame of commercial and eco-
nomic activities.
1.4 Foreseeable misuse
Any usage differing from the one stated in
these Instructions is strictly prohibited, par-
ticularly a usage:
○ outside the indicated temperature range
○ of non-specified means of operation
○ without adequate pressure relief valve
○ in continuous operation
○ in areas with aggressive or corrosive ma-
terials (e.g. high ozone pollution)
○ in areas with harmful radiation (e. g. ion-
ising radiation)
○ in an explosion protection zone
○ to supply, transport, or store hazardous
substances and mixtures in accordance
with annex I part 2-5 of the CLP regula-
tion (EC 1272/2008) and marked with
GHS 01 to GHS 06 and GHS 08 hazard
pictograms.
○ Use to feed, forward, or store gases,
liquefied gases, dissolved gases, va-
pours, or fluids whose vapour pressure
exceeds normal atmospheric pressure
(1013 mbar) by more than 0.5 bar at
the maximum permissible operating
temperature.
1.5 Painting of plastic parts
Painting of any plastic parts or seals of the
described products is expressly prohibited.
Remove or completely tape parts concerned
before painting the superior machine.
To Next Page
Loading...
