EN
4. Technical data
- 32 -
951-171-016
Version 03
The type identification code facilitates identification of important equipment features of the product. For type identification code see type identification plate of product.
Z P U 0 2
-
M 1 0 0
-
1 0 X Y B U
-
F
-
3 8 0
-
4 2 0 , 4 4 0
-
4 8 0
(A) (B) (C) (D) (E)
4.8
(A) Product designation (D) Pump elements
ZPU 01 1 pump element E Only pump element(s)
ZPU 02 2 pump elements V Bridge with pump element(s) and pressure gauge
F
Bridge with pump element(s), filter block, pressure gauge
and pressure control valve
(B) Drive assy. (E) Additional motor specification
M
Three-phase motor with flange Ø 90 mm, additional
designation, see (E)
000 Pump without motor, but with flange Ø 90 mm
100 Gear ratio i = 1:100* 500 Motor 500 V AC / 50 Hz
049 Gear ratio i = 1:049* 380 - 420
Motor for 380-420 V AC / 50 Hz and
440-480 V AC / 60 Hz
490 Gear ratio i = 1:490* 440-480
(C) Reservoir versions
10 XYBU 10L reservoir for grease and oil with level monitoring
10 XYN 10L reservoir for grease and oil without level monitoring
30 XYBU 30L reservoir for grease and oil with level monitoring
30 XYN 30L reservoir for grease and oil without level monitoring
* in case of gear ratio i = 1:100 and i = 1: 490 the maximum operating pressure is 350 bar.
In case of gear ratio i = 1:049 the maximum operating pressure is 400 bar.
To Next Page
Loading...
