Ski-Doo Skandic SWT User Manual

CONTROLS, INSTRUMENTS AND EQUIPMENT
J-Type Hitch (European Models)
Attaching an Equipment
mmo2011-007-012_a
1. Hairpin clip
2. Safety tab
1. Remove the hairpin clip.
2. Align accessory attachment hole
with the hitch hook.
3. Push the accessory attachment
passed the safety tab.
4. Secure safety tab using the hairpin
clip.
Detaching an Equipment
1. Remove the hairpin clip.
2. Push safety tab forward to free ac-
cessory attachment from the hitch.
3. Detach accessory attachment.
4. Install hairpin clip.
21) Hood
WARNING
Never operate engine with hood
removed from vehicle.
Hood Removal
1. Remove upper side panels as e
x-
plained in this subsection.
2. Unhook the rubber ties o
nboth
sides.
mmo2009-004-038_a
1. Rubber tie
3.Slidehoodtowardsfronttofreethe
tabs from their slots.
Hood Installation
1. Engage the tabs located at front and
center of the hood into the bottom
pan slots.
mmo2011-007-001_a
TYPICAL
1. Hood tabs
2. Bottom pan slots
2. Slide hood towards headlights until
it stops.
3. Hook the rubber ties.
22) Upper Side Panels
WARNING
Never operate engine with side
panels opened or removed from
vehicle.
Upper Side Panel Removal
1. Unhook the rubber tie.
42
______________

Ski-Doo Skandic SWT Specifications

General

Brand	Ski-Doo
Model	Skandic SWT
Category	Offroad Vehicle
Language	English