EasyManuals Logo

Ski-Doo Skandic SWT User Manual

Ski-Doo Skandic SWT
131 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #84 background imageLoading...
Page #84 background image
VEHICLE CARE
Post-Operation Care
Remove snow and ice from rear sus-
pension, track, front suspension,
steering mechanism and skis.
WARNING
Make sure tether cord cap is away
from engine cut-off switch before
standing in front the vehicle, get-
ting close to the track or rear sus-
pension components.
Always cover your snowmobile when
leaving it outside overnight or during
extended periods of inactivity. This
will protect it from frost and snow as
well as help retain its appearance.
Vehicle Cleaning and
Protection
Wash vehicle with water mixed with a
mild detergent. Use only flannel cloths
or an equivalent.
NOTICE
It is necessary to use flan-
nel cloths or equivalent on wind-
shieldandhoodtoavoidscratching
the surfaces.
To remove grease, oil and grime, use
BRPHEAVYDUTYCLEANER(P/N293
110 001).
NOTICE
Do not use Heavy duty
cleaner on decals or vinyl.
To remove stubborn dirt from all
plastic and vinyl surfaces, use XPS
MULTI-PURPOSE CLEANER (P/N 219
701 709).
To remove scratches on windshield or
hood use the SCRATCH REMOVER
KIT (P/N 861 774 800).
NOTICE
Never clean plastic parts
or hood with strong detergent, de-
greasing agent, paint thinner, ace
-
tone, products containing chlorine,
etc.
Wax painted portion of the vehicle for
better protection.
NOTE: Apply wax on glossy finish
only.
82
______________

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ski-Doo Skandic SWT and is the answer not in the manual?

Ski-Doo Skandic SWT Specifications

General IconGeneral
BrandSki-Doo
ModelSkandic SWT
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals