SJKB-40-D, SJKB-40-D/FPage ii
JUN. 1999
WARNING
ANSI/SIA (United States)
You are required by ANSI/SIA A92.5
-1992 to read and understand YOUR RESPONSIBILITIES in the Manual Of
Responsibilities before you use or operate this work platform.
CSA (Canada) and CE (Europe)
You are required to conform to national health and safety regulations applicable to the operation of this work platform.
FAILURE TO COMPLY with your REQUIRED RESPONSIBILITIES in the use and operation of the work
platform could result in death or serious injury.
OPERATOR SAFETY REMINDERS
The National Safety Council reminds us that most accidents are caused by the failure of some individuals to follow
simple and fundamental safety rules and precautions. Common sense dictates the use of protective clothing when
working on or near machinery. Use appropriate safety devices to protect your eyes, ears, hands, feet and body.
You, as a careful operator, are the best insurance against an accident. Therefore, proper usage of this work platform
is mandatory. The following pages of this manual should be read and understood completely before operating the
work platform. Any modifications from the original design are strictly forbidden without written permission from
SKYJACK, Inc.
FAILURE TO AVOID THIS HAZARD WILL RESULT IN DEATH OR SERIOUS INJURY!
THIS MACHINE IS NOT INSULATED.
MAINTAIN SAFE CLEARANCES FROM
ELECTRICAL POWER LINES AND
APPARATUS. YOU MUST ALLOW FOR
PLATFORM SWAY, ROCK OR SAG.
THIS WORK PLATFORM DOES NOT
PROVIDE PROTECTION FROM
CONTACT WITH OR PROXIMITY TO AN
ELECTRICALLY CHARGED CON-
DUCTOR.
ELECTROCUTION HAZARD
DANGER
VOLTAGE RANGE
MINIMUM SAFE APPROACH DISTANCE
(PHASE TO PHASE) (FEET)
(METERS)
AVOID CONTACT
10
(0 TO 300V)
(Over 300V to 50KV)
(Over 50KV to 200KV)
(Over 200KV to 350KV)
(Over 350KV to 500KV)
(Over 500KV to 750KV)
(Over 750KV to 1000KV)
15
20
25
35
45
3.05
4.60
6.10
7.62
10.67
13.72
To Next Page
Loading...
Need help?
General
