LNB Selection: You can change the type of LNB you are using from this menu.
Select the Universal LNB option for Turksat and Hotbird satellites.
Auto Scan: You can change the satellite you want to search from the list by entering
the Satellite Selection option with the up/down arrow keys. You can narrow down your
search by selecting Free or Encrypted from the Channel Type drop-down menu.
You can select DTV/Radio/All as the search type in the Program Type option. In Scan
mode, you can scan previously reg
istered TPs using the default option, or you can
select Full Scan/Network. After you've chosen these options, you can begin the
search by pressing the "Enter" button on the remote control and then the "Search"
button with the down arrow key.
Manual Scan: You can change the satellite you want to search from the list by
entering the Satellite Selection option with the up/down arrow keys. By pressing the
"Enter" button on your remote control while on the Transponder option, you can type
the frequency (TP) y
ou want to search for. You can then start the search by pressing
the "Enter" button on the remote control.
Satellite Dish Setup: Select the satellite you want to watch from the list on the right
side of the screen with the up/down arrow keys and press "Enter". Press the right
direction button to edit the satellite parameters. Select the parameter to be edited by
42
To Next Page
Loading...