using the up/down arrow keys.
LNB Setting: You can change the LNB type with the right/left direction buttons. The
commonly used LNB type in Turkey is 9750/10600.
LNB Power: Shows the status of the LNB power. The default value is "On."
22KHz: Indicates the status of the 22KHz signal. The default value is "Automatic."
Tone Burst: You can use this menu to set the Tone Burst signal. The default value is
"Disabled."
DiseqC 1.0: If you are using more than one satellite dish at the same time, you can
determine which satellit
e is connected to which LNB with the right/left direction keys.
DiseqC 1.1: If you are using more than one satellite dish at the same time, you can
determine which satellite is connected to which LNB with the right/left direction keys.
DiseqC 1.2 and DiseqC 1.3: If you are using a motorized satellite dish, you can
adjust the position setting from this menu.
Channel List: You can view the registered channels from this menu.
Favorites List: You can view the channels in the favorites list from this menu.
43
To Next Page
Loading...