Edit Channel: Select the channel you want to edit with the up/down arrow keys and
press ENTER. Select the operation you want to perform and press "Enter". For
example, after selecting channel move, use the Up/Down arrow keys to move the
channel to the desired position and press ENTER.
Program Guide: You can view the EPG information for supported broadcasts from
this menu.
CI Information: If you have installed a module on your TV to watch encrypted
channels, you can view information about the encryption system from
this menu. If the
module is not installed, this option will not be active.
(Analog Broadcast Mode)
If your TV source selection is Analog (ATV), you can change the channel settings with
this menu.
Auto Scan: When you select this option and press the "Enter" button, an automatic
channel search will start and the found channels will be automatically memorized.
Manual Scan: You can change the frequency while on the Current Frequency option
by pressing the Right/Left buttons, and you can repeat this process until you reach the
desir
ed frequency. While in the Program Search mode, you can use the Right/Left
arrow keys to perform an automatic scan in the direction of your choice.
(Digital Terrestrial Broadcasîng - DVB-T Mode)
If your TV source selection is (DVB-T), you can change the channel settings with this
menu.
Auto Scan: When you choose this option and press "Enter" to open the LCN option,
the channel numbers are locked and cannot be changed.
44
To Next Page
Loading...