EasyManua.ls Logo

SMA Sunny Island 5048 - Page 113

SMA Sunny Island 5048
224 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SMA Solar Technology AG Connecting External Sources
Technical Description SI5048-TB-TEN110340 113
Generator Interface "234.07 GnStrMod" = Manual; Start at the Generator
Generator Interface "234.07 GnStrMod" = Autostart; Start at the Generator
Generator Interface "234.07 GnStrMod" = GenMan; Start at the Generator
1 Manual generator start
2 "Generator is running" detected, beginning of warm up phase
3 Internal generator request is ignored
4 Warm-up phase is completed, generator is connected
5 Generator current limit
6 Current is reduced, battery absorption phase
7 Manual generator stop, disconnection of the generator
8 Minimum stop time has expired
* Transfer relay
1 Manual generator start
2 "Generator is running" detected, beginning of warm up phase
3 Warm-up phase completed
4 Generator is connected
5 Generator current limit
6 Current is reduced, battery absorption phase
7 Manual generator stop, disconnection of the generator
8 Generator is disconnected, beginning of stop time
9 End of stop time
* Transfer relay
1 Generator start at GenMan
2 Beginning of GenMan generator warm-up phase
3 Generator warm-up time
4 GenMan signals readiness for connection.
5 Sunny Island connects generator
6Current limit
7 Current is reduced, battery absorption phase
8 GenMan signals generator stop
9 Sunny Island disconnects generator
10 Generator follow-up time expired, generator stop
11 Stop time has expired
* Transfer relay

Table of Contents

Other manuals for SMA Sunny Island 5048

Related product manuals