Operation SMA Solar Technology AG
72 SI5048-TB-TEN110340 Technical Description
10.4 Compact Meters
The "150# Compact Meters" menu is intended primarily to help the installer commission the device.
The display gives you information at a glance on the following areas:
•Battery 1
•Battery 2
• Inverter (AC values)
•InvTot
• Grid/Generator (external)
•ExtTot
•Inverter status
Bat 1 (Battery Value 1)
Selecting the area
You can select the different displays of the compact meters using the up/down arrow
buttons. Here, you can also use the "Wrap around" function.
The displays are always shown from the upper left to the lower right.
Position Description
A Name of the compact meter
B Present battery state of charge (BatSoc)
C Estimated error of the state of charge (BatSocErr)
D Total battery current of the cluster (TotBatCur)
E Battery temperature (BatTmp)
To Next Page
Loading...
