SMA Sunny Island 5048 - 19 Parameter Lists; Display Values; Inverter Meters (110#)

Parameter lists SMA Solar Technology AG
146 SI5048-TB-TEN110340 Technical Description
19 Parameter lists
19.1 Display Values
All parameters contained in this section are display values. These parameters can only be read.
The parameters with a gray background are only visible after the installer password has been
entered. You will find an overview of the menu structure in section 10.1”Menu Structure” (page67).
19.1.1 Inverter Meters (110#)
111# Inverter Total Meters
112# Inverter Device Meters
Number Name Description
01 TotInvPwrAt Total active power of the inverters (cluster) in kW
02 TotInvCur Total current of the inverters (cluster) in A
03 TotInvPwrRt Total reactive power of the inverters (cluster) in kVAr
Number Name Description Value (plain
text no.)
Explanation
01 InvOpStt Operating state of the Sunny
Island
Standby (2) Standby
Run (3) Operation
EmCharge (4) Emergency charge
mode
Error (5) Error
Startup (1) Transfer standby >
operation
02 InvPwrAt Active power Sunny Island in kW
03 InvVtg Voltage of the Sunny Island in V
04 InvCur Current of the Sunny Island in A
05 InvFrq Frequency of the Sunny Island in
Hz
06 InvPwrRt Reactive power of the
Sunny Island in kVAr
07 Rly1Stt State of relay 1 Off Relay open
On Relay closed
08 Rly2Stt State of relay 2 Off Relay open
On Relay closed