SMA Sunny Island 5048 - 5 Opening and Closing; Opening the Sunny Island

Opening and Closing SMA Solar Technology AG
28 SI5048-TB-TEN110340 Technical Description
5 Opening and Closing
The enclosure of the Sunny Island has a removable lid. Remove the enclosure lid only when installing
the device or for required maintenance or repair work.
5.1 Opening the Sunny Island
1. Stop the Sunny Island as described in section 9.2”Stopping the Sunny Island (Standby)”
(page63).
2. Disconnect the Sunny Island from voltage sources as described in section 9.4”Disconnecting
the Device from Voltage Sources” (page64).
3. Ensure that the system cannot be accidentally switched on again.
4. Loosen all 6 screws on the enclosure lid and set
them aside.
5. Remove the lid and set it aside.
☑ The Sunny Island is open.