SMA Sunny Island 5048 - Page 44

Electrical Connection SMA Solar Technology AG
44 SI5048-TB-TEN110340 Technical Description
2 Slaves • Take the RJ45 cable coming from the master, insert it into the
Sunny Island slave 1 and plug it into the "ComSyncIn" socket
there.
• Remove the terminating resistor in the Sunny Island slave 1 from
the "ComSyncOut" socket.
• Plug the RJ45 cable, which is included in the delivery, into the
"ComSyncOut" socket of slave 1.
• Take the RJ45 cable coming from slave 1, insert it into the
Sunny Island slave 2 and plug it into the "ComSyncIn" socket
there.
☑ The Sunny Island master and slaves are connected.
Number of slaves Connection procedure