Archiving Data on a SD Card SMA Solar Technology AG
90 SI5048-TB-TEN110340 Technical Description
Firmware Update in a System with One Sunny Island
During the update, the Sunny Island displays the
following messages.
Firmware Update in a System with Several Sunny Island
In a system with several Sunny Island inverters, the firmware is only updated on the master. If the
master detects that a slave has a different firmware version, it transmits its firmware to the slave and
makes sure that all Sunny Island inverters within a system operate with the identical firmware version.
While the master updates the slaves, the devices show the following messages, among other things.
The display messages listed below may be shown at various lengths. Wait until the master displays
the message "Update finished. Press Enter" and the slaves display the message "Ready. Wait for
Master." Do not make any entries during the update.
Starting QCG
If you have carried out a firmware update in which the number before the dot in the
firmware version has changed, it is advisable to start QCG and to perform all settings
anew.
Sunny Island Display message Explanation
Master The master update starts.
Master Master update part 1/2.
To Next Page
Loading...
