Programming Using Local Adjustment
Operation Mode (MODE)
Z: Moves to the SAVE function.
S: This function is protected by a "password", when prompted PSWD activate (S) 2
times to proceed.
After entering the "password", you can move around the options listed in the table
below using (Z). In order to select the desired option, activate (S).
Save (SAVE)
Z: Selects ESCAPE to CONFIGURATION mode.
S: Saves lower value and upper value.
Escape (ESC)
Z: Moves to the UNIT function.
S: Escapes to the MAIN menu.
To Next Page
Loading...
