HGMS61 Genset Controller User Manual Page 29 of 47
Connect to Fail To Charge output.
All buttons in panel are inactive except and
there is in the right of fifth row in LCD when input is active.
Can prohibit “Audible Alarm” output when input is active.
In this mode, under voltage, under frequency and under speed
are not protected.
It is used for J1939 engine with CANBUS port, when input is
active, frequency is 60Hz.
If engine type is common J1939, when input is active, engine
target speed will increase 5RPM.
If engine type is common J1939, when input is active, engine
target speed will decrease 5RPM.