SMC Networks IMU-108 User Manual

33
IMU User Guide revision 3.1 SMC Ship Motion Control www.shipmotion.eu
4 MOTION SENSOR CONFIGURATION GUIDE
4.1 IMU CONFIGURATION SOFTWARE
After the motion sensor has been mounted correctly the SMC IMU Configuration Software can be
used to set the Motion sensor configuration and communication parameters according to the user
requirements.
The configuration software is a PC based tool, communicating with the motion sensor over a serial
port alternatively Ethernet if available.
The settings made in the IMU Configuration software are written to the motion sensor. The settings
are stored in flash memory inside the motion sensor and are not dependent on power supply or
battery power.

SMC Networks IMU-108 Specifications

General

Brand	SMC Networks
Model	IMU-108
Category	Accessories
Language	English