Smeg Tethys D60 - Alarms and Warning Messages; No Detergent Warning; Maintenance: Filter Replacement

User Manual
Tethys D60 - Tethys T60 - Tethys T45
Page 25 - 77
5.6.3 CUSTOM PROGRAMS
Programs (eg. 10, 11, 12, 13, 14 and 15) that can be modified to meet specific washing requirements.
Modifications can be made using the TRACELOG software (not part of the standard package) or by authorised
engineers on request.
For details of how to purchase the software and minimum installation requirements, contact your local dealer.
If parameters are modified from the default settings, a record should be kept of the various phases and the new
program settings.
Warning: when creating a custom program, do not include more than two thermal disinfection phases
at 93°C for 10min.
CUSTOM PROGRAM RECORD TEMPLATE
Program
1. Prewash /
Wash (cold)
2. Wash /
Enzymatic Wash
3. Chemical
Disinfection
4. Neutralisation
5. Mains Water
Rinse
6. Demi Rinse
7. Hot Demi Rinse
8. Thermal
Disinfection / Td +
lubrication
9. Drying
A0
Cycle time (except
drying)
ID.
Name
H2O Intake
Temp. [°C]
duration [min]
H2O Intake
Temp. [°C]
duration [min]
H2O Intake
Temp. [°C]
duration [min]
H2O Intake
Temp. [°C]
duration [min]
H2O Intake
Temp. [°C]
duration [min]
H2O Intake
Temp. [°C]
duration [min]
H2O Intake
Temp. [°C]
duration [min]
H2O Intake
Temp. [°C]
duration [min]
Temp. [°C]
duration [min]