Tethys D60 - Tethys T60 - Tethys T45
2.1 WASHING TROLLEYS AND ACCESSORIES
The Tethys D60, Tethys T60, Tethys T45 are supplied with the standard washing trolleys.
Contact your local dealer for details of the range of racks and baskets best suited to your washing
requirements.
Installation, maintenance and any repairs must be carried out by authorised technical staff.
Apart from leading to forfeiture of warranty cover, repairs performed by unauthorised staff may
put the user’s safety at risk. Any components must always be replaced with genuine spare parts.
2.1.1 Optional printer
The appliance’s RS-232 port can be used to connect the external printer, supplied with its own power transformer.
This accessory should be used only with thermal paper, 57.5mm ± 1mm, recommended weight 55 g/m
2
.
To operate this accessory, simply connect the transformer to the power socket and connect the RS-232 port to the RS-
232 socket on the rear of the device.
Refer to the accessory’s manual for detailed instructions.
fig. 1 – desktop optional printer.
fig. 2 – RS-232 cable supplied with the printer and position of the RS-232 socket on the device.
2.1.2 PERISTALTIC PUMP P3 - (cannot be installed on Tethys T45)
Peristaltic pump P3 is always optional: contact your local dealer for advice about the model best suited to your needs.
To Next Page
Loading...
