EasyManua.ls Logo

Smeg Tethys D60 - Page 66

Smeg Tethys D60
77 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User Manual
Tethys D60 - Tethys T60 - Tethys T45
Page 66 - 77
ELECTRICITY SUPPLY
MODEL
ELECTRICITY SUPPLY
CHARACTERISTICS
RECOMMENDED
MAGNETOTHERMAL
SWITCH
[IN THE SYSTEM, RESPONSIBILITY
OF THE USER]
Max voltage/power
There are three possible
electrical versions.
60cm models: The names of the
models have different suffixes
to identify the power supply
rating.
E.g. If the model does not have
a suffix, e.g. “Tethys D60it will
be three-phase, with neutral,
400V between phases.
Tethys D60-3” indicates three-
phase model, 230V between
phases, no neutral.
Tethys D60-1” indicates single-
phase model.
Tethys D60
Tethys T60
400V 3N~ / 50Hz / 12A / 7000W
FUSES 10.3x38 16 A ON
POWER SUPPLY
[L1, L2, L3]
Tethys D60-3
Tethys T60-3
230V 3~ / 50Hz / 19A / 7000W
FUSES 10.3x38 20 A ON
POWER SUPPLY
[L1, L2, L3]
Tethys D60-1
Tethys T60-1
230V 1N~ / 50Hz / 12A / 2800W
FUSES 10.3x38 16 A ON
POWER SUPPLY
[L1, N]
Tethys T45
230V 1N~ / 50Hz / 14A / 3300W
FUSES 10.3x38 16 A ON
POWER SUPPLY
[L1, N]
OTHER DATA
DATA COMMUNICATION
- PRINTER CONNECTION
RS-232 PORT
MAX. NOISE LEVEL
50dB
AMBIENT CONDITIONS
USE
Indoor
ALTITUDE
Up to 1000m
AMBIENT TEMPERATURE
From 5°C to 40°C
MAX RELATIVE HUMIDITY
80% for temperatures up to 31°C with linear decrease
to 50% at the temperature of 40°C
INSTALLATION CATEGORY (OR SURGE CATEGORY or
INSTALLATION CATEGORY)
II
ELECTRICAL INSULATION CLASS (ref. IEC 61140)
I
DEGREE OF POLLUTION
2 (rif. IEC61010-1:2010, par.3.6.8)
STANDARDS AND CLASSIFICATION
CONFORMITY
- European directive 2014/35/EU (2006/95/CE) [Safety]: European Standard EN61010-
1:2010, EN61010-2-040:2015
- European directive 2014/30/EU (2004/108/CE) [Emc] : European Standard
EN61326:2013
- European directive 2011/65/CE (RoHS 2) : European Standard EN50581:2012
- European directive 93/42/CE, 2007/47/CE [MD]: European Standard
EN ISO 14971:2012, EN 62304:2006+AC:2008, EN62366:2008, EN ISO 15883-
1:2009+A1:2014, EN ISO 15883-2:2009
- Other: European Standard EN 61770:2009
MEDICAL DEVICE
CLASSIFICATION
class IIb medical devices (in accordance with the classification criteria established by
Directive 93/42 and subsequent additions and amendments, extended and amended by
EC Directive 2007/47).

Table of Contents

Related product manuals