Disablement conditions
A disablement condition is the manual or automatic disablement of a part of the fire detection system. An
automatic disablement may be pre-configured for your premises to disable smoke sensors during the normal
working hours in areas where smoke or dust may be present. A manual disablement may be necessary where
building work is being undertaken that could result in a false alarm.
What must be done?
Investigate the reason for the
disablement and re-instate the
devices if appropriate.
Record the event
Where necessary make an
entry in the log book of the
event for future reference.
Multiple Disablements
The number 'n' following the
word 'Disable' located top left
on the display denotes the
number of disablements
present in the system.
Each disablement is logged in
the Historic Events log which
can be recalled using the
menus, see How to view the
Historic Events.
16
Operating instructions
On
Flashing
This indication is only given if a sector, sounder device
or master alarms in the s
To Next Page
Loading...