33
Scanner Scanner Operation
b. Selecting the Select/Deselect icon activates it. Now you can add or remove parameters
by selecting individual entries in the list.
Note the following:
– Items at the top of the list that cannot be highlighted are locked and cannot be turned off.
– Use the Select All icon to display the complete list.
– Use the Deselect All icon to remove all of the highlights.
3. Select Back to display the updated data list.
Changing Screen Views
Selecting the View icon opens a drop-down menu of options:
• PID List
• 1 Graph
• 2 Graph
• 4 Graph
The PID (parameter identification) List view is a 2-column display with the name of the parameters
in the left column and their current values in the right column (Figure 4-12).
The 1, 2, and 4 Graph views divide the screen horizontally to simultaneously display data graphs
for the indicated number of parameters (Figure 4-13). Use the scroll bar or the up (b) and down
(d) icons to view other parameters in the list.
Figure 4-13 Four graph view
i Any previously set conditions, such as held data or locked lines of data, remain in effect when the
screen view is changed.
To Next Page
Loading...
Need help?
General
