120-121
Laser Engraving and Cutting
2. Camera Calibration
Brief Introduction
The 10W Laser Module contains a wide-angle HD camera to capture the image of the work area, generating a
background to edit the laser engraving and cutting objects.
How It Works
Camera Calibration adjusts the scale of the captured image to display a proper view of the work platform after
Camera Capture. During this process, the machine will engrave a square on a piece of blank paper and capture
its image to calibrate the camera.
Every time after you have reassembled the module or machine, you need to redo the
Thickness Measurement Calibration.
Every time after you have reassembled the module or machine, you need to redo the Camera
Calibration.
To Next Page
Loading...
