130-131
Laser Engraving and Cutting
As for the way to determine the laser engraving and cutting position, in addition to the Camera
Capture method introduced above, you can also try the Work Origin method.
As for the way to start a laser job, you can also use the USB cable to connect Luban with the
machine, or transfer the G-code file to the machine through a USB flash drive or Wi-Fi and
start jobs on the Touchscreen.
For more detailed information, refer to our online User Manual: On the navigation bar of the
Snapmaker official website, click Support > Product Support > Snapmaker Artisan > User
Manual.
Share!
Share your finished work in
our Facebook group and our
forum.
To Next Page
Loading...
