Snom 710 - Page 28

28
snom 710 User Manual Getting to Know Your Phone
Note: When the phone is in administrator mode and the Maintenance menu is on the
display, pressing key 2
2
ABC
will switch the phone to user mode.
When the phone is in user mode and the Maintenance menu is on the display, press key 2
2
ABC
to switch the phone to administrator mode. You will be asked for the administrator
password. The default administrator password is 0000 (4 x zero).
Most of the individual settings are described elsewhere in this manual: See "Using the phone" on page
42 and "Customizing the phone settings" on page 63.