Snom 710 - Active Calls; Holding Calls

47
snom 710 User Manual Using the Phone
Active calls
Connected call
The connection is indicated by the symbol of the two receivers , followed by the caller or callee ID, if
transmitted. The default setting for the presentation of caller ID on the display is "Name". If you wish to
change the setting to number, name and number, number and name, or "full contact" (the entire URL of
the connected caller/callee is displayed), open the phone's web interface > Preferences > General
Information and select a setting from the drop-down menu of "Number Display Style".
Hold
One call on hold
• Press
Hold
or the line key of the call to put the ongoing call on hold. Held calls are indicated
threefold:
◦ By the text on the display
◦ By the slowly blinking line key (green LED)
◦ By the glowing call indication LED (red LEDs)
You can now:
◦ transfer the held call blindly or with prior announcement - see "Transferring calls" on page 48.
◦ receive and make calls and put other calls on hold.
• Pick up the held call by pressing its line key or by pressing
Hold
again. If the other party hangs
up while on hold the call terminates on your phone as well, and the indicators are turned off.
Holding multiple calls
When you have one call on hold and you are connected to a second call, press
Hold
or the line key
to put the second call on hold. Continue likewise to put more calls on hold.
Fig. 1 Fig. 2
When multiple calls are on hold, the status bar tells you how many there are (Fig. 1).
◦ Use to scroll through the held calls. Your input on the phone's keys will affect the call