Snom 710 - Accepting Calls

45
snom 710 User Manual Using the Phone
• Press
Ok
to dial.
• Press
Cancel
to turn off call completion for this call.
Number guessing (auto completion)
Note: The default setting for Number guessing is off. To be able to use, open the
phone's web interface to Advanced > Behavior > Phone Behavior, change the setting
to "on", and enter the minimum number of characters you must enter before number
guessing will start.
When you dial and have typed the minimum number of digits, the phone will propose numbers
containing the typed string from the numbers saved on its call lists and in the directory. When the
desired number is on the display, press to dial.
In the following example, the minimum number of characters is four:
Fig. A Fig. B Fig. C
Accepting calls
Using different audio devices
Handset: Pick up the handset.
Headset: Press or the blinking line key.
Speakerphone: Press .
Automatically accepting calls
The default setting is "off". Turning the function on: On the phone's web interface > Configuration
Identity # > SIP tab > Auto answer: Click on the radio button "On".
With this setting, your phone will automatically accept incoming calls when the phone is idle:
• If your are using Firmware version 8.7.2 and higher, calls will be accepted on speakerphone; press
the headset key if you want them to go to the headset.