72
snom 710 User Manual Customizing the Phone Settings
Turning call forwarding off
1. Web interface > Preferences > Call Forwarding.
2. Click "Off" after the forwarding event ("Always", "Busy", "Timeout").
3. Click on "Apply" and "Save".
Call completion
On snom phones call completion means that when a called number is busy or not available, your phone
will call you back as soon as the dialed number is not busy anymore or available again. The factory
default setting is "off". See "Call completion" on page 44 on how to use this feature.
Note: This function depends on whether it is available in your network or not.
Changing the setting to turn it on:
On the phone
1. Press
Settin
> 2 Call Features > 2 Outgoing Calls.
2. Press "3
Call Completion" to change to "3 Call Completion".
3. Press
for 2 seconds to return to the idle screen.
On the web interface
1. Web interface > Advanced > Behavior > Phone Behavior > Call Completion.
2. Click "On".
3. Click on "Apply" and "Save".
Call waiting
When you are in a call, another incoming call will be announced visually by the symbol and
acoustically by the sound of a double beep; you will also see caller ID on-screen if it is being
transmitted. Switch to visual or acoustic announcement only or turn call waiting off on the phone’s web
interface.
The default setting is "on", which means that calls are announced both acoustically and visually. See
"Call waiting" on page 50 on how to use this feature.
Single call waiting More than one call waiting
To Next Page
Loading...
