42
snom 710 User Manual Using the Phone
Using the phone
This section describes the functions of the phone with the factory default settings. If your phone was
installed and/or set up by someone else, the default settings may have been changed. Please check
with that person or company if the phone does not react as described here.
The caller information displayed on the screen is controlled by a setting on the phone‘s web interface.
The default setting is "Number". You can change the setting at Preferences > General Information >
Number Display Style by selecting a different option from the drop-down list. See "Customizing the
phone settings" on page 63 for more information.
Making calls
See "Alphanumeric Keypad" on page 22 for information on input modes and entering letters, numerals,
and special characters.
Selecting identity for current outgoing call
See "Identities/accounts" on page 64 on how to configure identities.
If more than one identity is shown on the display, the one preceded by is the outgoing identity for the
call and the number/name that will show on the callee’s phone. Use or to select another identity.
Using different audio devices
Handset
• Pick up the handset, enter the phone number, and press . OR
• Enter the phone number and pick up the handset.
Headset
Enter the phone number and press or headset key.
Speakerphone
Enter the phone number and press the speaker key.
Speakerphone and handset or headset
1. Use the method for handset or headset use to dial.
2. Press
+Spkr
to add speakerphone. Press
-Spkr
to turn speakerphone off.
To Next Page
Loading...
