63
snom 710 User Manual Customizing the Phone Settings
When you select the setting "on", the backlight will dim when there has been no activity on the phone
for the number of seconds specified on the phone's web interface. The default setting is 20 seconds.
Selecting the setting:
1. Press
Settin
.
2. Press 1 Preferences.
3. Press 5 Display.
4. Press 2 Backlight.
5. Press the right (
/ ) or left ( / ) arrow (function key or navigation key) to switch
between the settings.
Changing the number of seconds after which the phone will dim the backlight to the idle screen setting
(applicable to backlight setting "on" only):
1. Open the phone's web interface (see "Opening the web interface" on page 30).
2. Click on "Preferences" (see "How the web interface works" on page 31).
3. Enter the number of seconds in the text field of "Dim after (in seconds)" (in the section "General
Information". default is 20 seconds.
4. Click on "Apply" and "Save".
Identities/accounts
The phone supports up to four accounts or "phone numbers" with one or more providers or within
an office or organization network. On snom phones these accounts or phone numbers are called
"identities".
If your phone is part of an office network, you may need to contact your administrator to configure new
or change existing identities, as this can only be done when the phone is running in administrator mode
and when the PBX settings allow it.
See "Initializing and registering the phone" on page 15 for the information on required input data.
Configuring new identity/account
On the phone
You can do the basic setup (account/number & registrar) on the phone:
1. Press
Settin
> 3 Identity > 3 Edit User.
2. Press
to scroll down.
To Next Page
Loading...
