ITALIANOENGLISH
8
IOMMASIPXX09-GB 04
10-40 kVA
MASTERYS IP+
UNPACKING AND INSTALLATION
OF THE UNIT
3
The packaging guarantees the stability of the UPS during shipping and physical transfer. Carry the packaged unit as
close as possible to the installation site.
3.1 SHIPPING AND MOVING.
• The UPS must remain in a vertical position during all shipping and moving operations.
• Ensure that the oor is strong enough to support the weight of the UPS and of the battery cabinet, if used.
Avoid pressing on the front door when moving the unit.
The UPS MUST only be moved by two people at least by the means of a forklift.
CAUTION IF DAMAGED.
BATTERIES, NON SPILLABLE.
Packages, crushed, punctured, or torn such that contents are revealed
must be set aside in an isolated area and inspected by a quali ed per-
son. If the package is deemed to be not shippable, the contents must
be promptly collected, segregated, and either the consignor or consignee
contacted.
All packaging material must be recycled in compliance with the laws in force in the country where
the system is installed.
Battery is NOT connected!
To Next Page
Loading...
Need help?
General