SolarEdge SE1000 - Introducing the SolarEdge Control and Communication Gateway

Chapter 1: Introducing the SolarEdge Control and Communication Gateway
Control and Communication Gateway Installation Guide - MAN-01-00132-1.2
7
Chapter 1: Introducing the SolarEdge Control
and Communication Gateway
Overview
The SolarEdge control and communication gateway expands the SolarEdge monitoring and control
capabilities. It can be connected to SolarEdge and non-SolarEdge inverters, environmental sensors and
revenue meters and can transfer the monitoring data to the SolarEdge monitoring server and optionally,
to a non-SolarEdge logger.
The control and communication gateway can connect to the following devices
1
:

SolarEdge devices, such as inverters and safety and monitoring interfaces (SMIs)

Non-SolarEdge inverters for inverter data monitoring on the SolarEdge portal

Environmental sensors

Revenue grade meters

3
rd
party external loggers for inverter data monitoring

Power reduction control devices
NOTE:
Sensors, meters, loggers, and power reduction control devices are sold separately .
Figure 1: The SolarEdge Control and Communication Gateway
1
For a list of supported environmental sensors, revenue meters, and third party inverters, refer to
http://www.solaredge.com/articles/se-supported-devices