SolarEdge SE5K User Manual

Inverter Energy
Today
45 kWh
This Month
1.14 MWh
This Year
13.68 MWh

Total: 41.03 MWh

Today: since midnight
This Month: since 1st of the current month
This Year: since January 1st
Total (Wh): The inverter total energy. If an external meter is installed, the value
displayed in this line depends on the meter type connected to the inverter and
its location:
If a bidirectional meter is connected at the consumption point, this
value is the consumed energy.
If the meter is installed at the production point, this value is the energy
produced by the site.
If the meter is installed at the grid connection point, this value is the
energy exported to the grid.
Meter Status
Meters
Export – RS485-2 Modbus ID #2
Status: OK
Chapter 5: Activating, Commissioning and Configuring the System Using the
Inverter SetApp 45
Three Phase System Installation Guide MAN-01-00505-1.2

SolarEdge SE5K Specifications

General

Model	SE5K
Manufacturer	SolarEdge
AC Output Power	5000 W
Rated AC Power	5000 W
Max. Efficiency	98.3%
Cooling	Natural convection
Protection Rating	IP65
Max. Input DC Voltage	480 V
Max. Input Current	11 A
Number of MPP Trackers	1
Warranty	12 years
Communication Interfaces	RS485, Ethernet
AC Voltage	230 V
Operating Temperature Range	-25°C to +60°C
MPPT Voltage Range	330-480V