User Manual
d. Lift the inverter above the bracket and then slide down to make sure they match perfectly.
Figure 3.14 Construction bolt
Figure 3.15 Mount the inverter
c. Align the mounting plate with the holes, Insert the combination bolt (M10X40)through the
mounting plate into the hole. Secure the bracket to the metal frame firmly with the supplied
fastener. Torque the nut to 25.8 ft.lbs.
e. Use supplied 2 M6x12 hex bolts to secure the inverter to the bracket (see figure 3.9).
3. Installation
19
To Next Page
Loading...
