What does ARC- FAULT (1041 DATA:0000) mean on SOLIS Inverter and how to fix it?
The ARC- FAULT (1041 DATA:0000) error on your SOLIS Inverter indicates a potential arc fault. Start by verifying that all connections within your PV system are tight. If further adjustment is needed, arc fault settings can be changed in advanced settings.
Why is my SOLIS S6-GR1P6K showing OV-DC01 (1020 DATA:0001)?
The OV-DC01 (1020 DATA:0001) error on your SOLIS Inverter indicates a potential issue with the PV voltage. Check if the PV voltage is abnormal. If the issue persists, restart the system to confirm that the fault continues.
What to do if SOLIS Inverter displays OV-ILLC (1052 DATA:0000)?
If your SOLIS Inverter displays OV-ILLC (1052 DATA:0000), it may be due to an overloaded backup load. Check whether the backup load is overloaded. If the problem continues, restart the system to see if the fault clears.
How do I troubleshoot PV ISO-PRO01 (1033 DATA:0001) error on my SOLIS Inverter?
If your SOLIS Inverter displays PV ISO-PRO01 (1033 DATA:0001), check whether the PV strings have insulation problems and whether the PV cable is damaged.
How to troubleshoot OV-TEM error on SOLIS Inverter?
If your SOLIS Inverter is showing an OV-TEM error, start by checking if the installation location meets the requirements specified in the user manual. Then, try to lower the ambient temperature around the inverter. After doing so, restart the inverter after fifteen minutes. If the error continues, contact the factory's customer service.
How to fix ILeak-Check error on SOLIS Inverter?
If your SOLIS Inverter shows an ILeak-Check error, upgrade the software to the latest version. If the fault continues after the upgrade, contact the factory's customer service.
What to do if my SOLIS S6-GR1P6K displays Fan Alarm?
If your SOLIS Inverter shows a Fan Alarm, check if the internal fan is working correctly or if it is jammed.
How to troubleshoot battery overcurrent on SOLIS S6-GR1P6K Inverter?
If your SOLIS Inverter is showing a battery overcurrent error, restart the inverter.
Why does my SOLIS S6-GR1P6K Inverter show a NO-Grid error?
If your SOLIS Inverter displays a NO-Grid error, first verify that the inverter is properly connected to the power grid. Next, check if the connected power grid is functioning normally. If the mains connection is normal, it is recommended to contact maintenance staff.
What to do if my SOLIS S6-GR1P6K Inverter displays GRID-INTF02 (1046 DATA:0000)?
If your SOLIS Inverter displays GRID-INTF02 (1046 DATA:0000), confirm whether the grid is seriously distorted and check whether the AC cable is connected reliably.
General| Model | S6-GR1P6K |
|---|---|
| Rated Output Power | 6000 W |
| Max. Input Voltage | 600 V |
| Start-up Voltage | 90 V |
| Number of MPPT Trackers | 2 |
| MPPT Efficiency | 99.9% |
| Nominal AC Output Power | 6000 W |
| Nominal AC Voltage | 230 V |
| AC Voltage Range | 180-280 V |
| Nominal Grid Frequency | 50/60 Hz |
| THDi | <3% |
| DC Connection Type | MC4 |
| Protection Degree | IP65 |
| Topology | Transformerless |
| Cooling Method | Natural convection |
| Max. DC Input Power | 9000 W |
| Max. AC Apparent Power | 6000 VA |
| Operating Temperature Range | -25°C to 60°C |
| Type | Single-phase inverter |
To Next Page
