What causes UN-TEM error on a SOLIS S6-GR1P6K Inverter?
If your SOLIS Inverter displays an UN-TEM error, check if the ambient temperature is too low and restart the inverter. If the error persists, contact the factory's customer service.
What to do if my SOLIS Inverter displays 'Over-Load'?
If your SOLIS Inverter shows an 'Over-Load' error, it means the backup load power is too large, or an inductive load's startup power is too high. Try removing some of the backup load or disconnecting any inductive loads from the backup.
How to troubleshoot a 'Fan Alarm' on my SOLIS Inverter?
If you receive a 'Fan Alarm' on your SOLIS Inverter, check whether the internal fan is working correctly or if it is jammed.
What does 'Off' mean on my SOLIS S6-GR1P6K and how to fix it?
If your SOLIS Inverter is 'Off', turn on the device using the ON/OFF Setting.
Why is my SOLIS Inverter showing 'OV-G-V01'?
The 'OV-G-V01' error on your SOLIS Inverter indicates a potential issue with the power grid or AC cable connection. First, check if the power grid is abnormal. Next, confirm that the AC cable is properly connected. If the issue persists, restart the system.
What to do if my SOLIS S6-GR1P6K Inverter displays 'Surge Alarm'?
If your SOLIS Inverter is showing a 'Surge Alarm', it indicates a grid side fault. Restart the device. If the problem continues, contact the manufacturer's customer service.
How do I fix a 'CAN Fail' error on my SOLIS S6-GR1P6K Inverter?
To address a 'CAN Fail' error on your SOLIS Inverter: - Check the cable conditions. - Ensure the cable is plugged into the CAN port of both the battery and the inverter. - Verify you are using the correct cable. - Note that some batteries require a special cable from the battery manufacturer.
What does 'OV-Vbatt' mean on my SOLIS S6-GR1P6K and how to solve it?
The 'OV-Vbatt' error on your SOLIS Inverter indicates an over-voltage issue with the battery. Verify the battery voltage is within the specified standards. Also, measure the battery voltage at the inverter connection point. If problems persist, contact your battery manufacturer for service.
What does 'OV-DC01 (1020 DATA:0001)' mean on SOLIS Inverter and how to fix it?
The error 'OV-DC01 (1020 DATA:0001)' on your SOLIS Inverter indicates an abnormal PV voltage. Check if the PV voltage is abnormal. If the issue persists, restart the system.
What does 'OV-TEM (1032 DATA:0000)' mean on my SOLIS Inverter and how do I resolve it?
If your SOLIS Inverter displays 'OV-TEM (1032 DATA:0000)', it indicates a temperature issue. Check whether the surrounding environment of the inverter has poor heat dissipation and confirm whether the product installation meets the requirements.
General| Model | S6-GR1P6K |
|---|---|
| Rated Output Power | 6000 W |
| Max. Input Voltage | 600 V |
| Start-up Voltage | 90 V |
| Number of MPPT Trackers | 2 |
| MPPT Efficiency | 99.9% |
| Nominal AC Output Power | 6000 W |
| Nominal AC Voltage | 230 V |
| AC Voltage Range | 180-280 V |
| Nominal Grid Frequency | 50/60 Hz |
| THDi | <3% |
| DC Connection Type | MC4 |
| Protection Degree | IP65 |
| Topology | Transformerless |
| Cooling Method | Natural convection |
| Max. DC Input Power | 9000 W |
| Max. AC Apparent Power | 6000 VA |
| Operating Temperature Range | -25°C to 60°C |
| Type | Single-phase inverter |
To Next Page
