What to do if SOLIS Inverter displays 12Power-FAULT (1038 DATA:0000)?
If your SOLIS Inverter displays 12Power-FAULT (1038 DATA:0000), check for current leakage to ground. Verify your grounding and ensure all wires are in good condition and not leaking current to ground.
What does ARC- FAULT (1041 DATA:0000) mean on SOLIS Inverter and how to fix it?
The ARC- FAULT (1041 DATA:0000) error on your SOLIS Inverter indicates a potential arc fault. Start by verifying that all connections within your PV system are tight. If further adjustment is needed, arc fault settings can be changed in advanced settings.
Why is my SOLIS S6-GR1P6K showing OV-DC01 (1020 DATA:0001)?
The OV-DC01 (1020 DATA:0001) error on your SOLIS Inverter indicates a potential issue with the PV voltage. Check if the PV voltage is abnormal. If the issue persists, restart the system to confirm that the fault continues.
What to do if SOLIS Inverter displays OV-ILLC (1052 DATA:0000)?
If your SOLIS Inverter displays OV-ILLC (1052 DATA:0000), it may be due to an overloaded backup load. Check whether the backup load is overloaded. If the problem continues, restart the system to see if the fault clears.
What does UN-TEM (103A DATA:0000) error mean on my SOLIS S6-GR1P6K Inverter?
If your SOLIS Inverter displays UN-TEM (103A DATA:0000), check the working environment temperature of the inverter. Restart the system to confirm if the fault continues.
What to do if SOLIS S6-GR1P6K Inverter displays DCInj-FAULT (1037 DATA:0000)?
If your SOLIS Inverter shows a DCInj-FAULT (1037 DATA:0000) error, it could indicate an issue with the grid or AC cable connection. First, confirm that the grid is not abnormal. Next, ensure the AC cable connection is secure. If the problem persists, restart the system to see if the fault continues.
What does LmtByEPM mean on my SOLIS S6-GR1P6K and how to fix it?
The 'LmtByEPM' message on your SOLIS Inverter indicates a power limitation issue. Confirm the inverter is connected to an external EPM/meter to prevent reverse current. Also, check if the inverter is controlled by an external third-party device or whether the power setting of the inverter power control is limited.
Why is my SOLIS Inverter showing OV-G-V01 error?
The OV-G-V01 error on your SOLIS Inverter could be due to an abnormal power grid or an improperly connected AC cable. First, check if the power grid is working correctly. Next, ensure the AC cable is properly connected. If the issue continues, restart the system to see if the fault clears.
What to do if my SOLIS S6-GR1P6K Inverter shows a Surge Alarm?
If your SOLIS Inverter displays a Surge Alarm, there may be a grid side fault. Restart the device. If the alarm persists after restarting, contact the manufacturer's customer service for assistance.
Why does my SOLIS S6-GR1P6K Inverter show a NO-Grid error?
If your SOLIS Inverter displays a NO-Grid error, first verify that the inverter is properly connected to the power grid. Next, check if the connected power grid is functioning normally. If the mains connection is normal, it is recommended to contact maintenance staff.
General| Model | S6-GR1P6K |
|---|---|
| Rated Output Power | 6000 W |
| Max. Input Voltage | 600 V |
| Start-up Voltage | 90 V |
| Number of MPPT Trackers | 2 |
| MPPT Efficiency | 99.9% |
| Nominal AC Output Power | 6000 W |
| Nominal AC Voltage | 230 V |
| AC Voltage Range | 180-280 V |
| Nominal Grid Frequency | 50/60 Hz |
| THDi | <3% |
| DC Connection Type | MC4 |
| Protection Degree | IP65 |
| Topology | Transformerless |
| Cooling Method | Natural convection |
| Max. DC Input Power | 9000 W |
| Max. AC Apparent Power | 6000 VA |
| Operating Temperature Range | -25°C to 60°C |
| Type | Single-phase inverter |
To Next Page
