What does 'OV-Vbatt' mean on my SOLIS S6-GR1P6K and how to solve it?
The 'OV-Vbatt' error on your SOLIS Inverter indicates an over-voltage issue with the battery. Verify the battery voltage is within the specified standards. Also, measure the battery voltage at the inverter connection point. If problems persist, contact your battery manufacturer for service.
What does ARC- FAULT (1041 DATA:0000) mean on SOLIS Inverter and how to fix it?
The ARC- FAULT (1041 DATA:0000) error on your SOLIS Inverter indicates a potential arc fault. Start by verifying that all connections within your PV system are tight. If further adjustment is needed, arc fault settings can be changed in advanced settings.
What to do if SOLIS Inverter displays 12Power-FAULT (1038 DATA:0000)?
If your SOLIS Inverter displays 12Power-FAULT (1038 DATA:0000), check for current leakage to ground. Verify your grounding and ensure all wires are in good condition and not leaking current to ground.
Why is my SOLIS S6-GR1P6K showing NO-Battery error?
If your SOLIS Inverter is showing a NO-Battery error, check the battery voltage. First, verify the battery voltage is within the specified standards on page 1 of the information display. Also, measure the battery voltage at the plug.
What does 'OV-Vbackup' mean on my SOLIS S6-GR1P6K Inverter and how to fix it?
The 'OV-Vbackup' error on your SOLIS Inverter indicates an over-voltage issue with the backup. Check whether the backup port wiring is normal. If the issue persists, restart the system.
How to troubleshoot a 'Fan Alarm' on my SOLIS Inverter?
If you receive a 'Fan Alarm' on your SOLIS Inverter, check whether the internal fan is working correctly or if it is jammed.
What causes the OV-BUS error on a SOLIS S6-GR1P6K?
If your SOLIS Inverter shows an OV-BUS error, first check if the input voltage exceeds the maximum input voltage of the inverter. If it doesn't, try restarting the inverter. If the issue persists after restarting, contact the factory's customer service for further assistance.
What does LmtByEPM mean on my SOLIS S6-GR1P6K?
If your SOLIS Inverter is showing 'LmtByEPM', confirm the inverter is connected to an external EPM/meter to prevent reverse current. Also, check if the inverter is controlled by an external third-party device and verify if the power setting of the inverter power control is limited. You may also need to verify settings in section 6.6.7 and check your meter readings.
What does 12Power-FAULT mean on SOLIS S6-GR1P6K Inverter?
If your SOLIS Inverter displays '12Power-FAULT (1038 DATA:0000)', check for current leakage to ground, verify your grounding, and ensure all wires are in good condition and not leaking current to ground.
What does BatName-FAIL mean on SOLIS Inverter?
If your SOLIS Inverter displays 'BatName-FAIL', confirm that the battery model selection is consistent with the actual battery you are using.
General| Model | S6-GR1P6K |
|---|---|
| Rated Output Power | 6000 W |
| Max. Input Voltage | 600 V |
| Start-up Voltage | 90 V |
| Number of MPPT Trackers | 2 |
| MPPT Efficiency | 99.9% |
| Nominal AC Output Power | 6000 W |
| Nominal AC Voltage | 230 V |
| AC Voltage Range | 180-280 V |
| Nominal Grid Frequency | 50/60 Hz |
| THDi | <3% |
| DC Connection Type | MC4 |
| Protection Degree | IP65 |
| Topology | Transformerless |
| Cooling Method | Natural convection |
| Max. DC Input Power | 9000 W |
| Max. AC Apparent Power | 6000 VA |
| Operating Temperature Range | -25°C to 60°C |
| Type | Single-phase inverter |
To Next Page
