44
Non contractual images Copyright © 2005 - 2014 Somfy SAS. All rights reserved.
EN
2. 3. 2. Setting the end limits
1
end slat.
2. 3. 2. 1. With locks and with stops on the end slat
1)
2)
3)
The end limit positions are programmed.
2. 3. 2. 2. With locks and without stops on the end slat
the control point.
Setting the upper end limit
1)
2)
3) Place the roller shutter in the desired upper end
limit position.
4)
5)
The upper end limit position is programmed.
2. 3. 2. 3.
the control point.
Setting the lower end limit
1)
2)
3) Place the roller shutter in the desired lower end
limit position.
4)
5)
The lower end limit position is programmed.
GF
1)
3)
2)
3s
3s
3s
HF
1)
5)
3)
3s
3s
0.5s 3s
3s
4)
2)
G
1)
5)
3)
3s
3s
0.5s 3s
3s
4)
2)
To Next Page
Loading...
