3
Table of contents
8.9 Programming the transmitter 26
8.10 Information on Memo 27
8.11 Cancelling programming mode 27
8.12 Deleting a transmitter button from
the radio channel 27
8.13 Deleting transmitter completely from the receiver 27
8.14 Deleting a radio channel in the receiver 27
8.15 Deleting all radio channels in the receiver 28
8.16 Programming a second transmitter by radio (HFL) 28
8.17 Resetting the control unit 28
9. Final test/handover 30
9.1 Testing obstacle detection 30
9.2 Handover of the door system 30
10. Operation 31
10.1 Safety information on operation 31
10.2 Operation using the button pad
in the housing cover 31
10.3 Operation with external button (2-way/3-way) 32
10.4 Operation using handheld transmitter 32
10.5 Obstacle detection 33
10.6 Operation after a power failure 33
10.7 Dead man mode/hold to run mode 33
11. Maintenance and care 34
11.1 Safety instructions for maintenance and care 34
11.2 Reading out the number of cycles via LEDs 35
11.3 Reading out the number of cycles via SOMlink 35
11.4 Changing light bulbs 35
12. Troubleshooting 36
12.1 Safety instructions for troubleshooting 36
12.2 Troubleshooting 36
12.3 Time sequences of operator lighting in normal
mode and in case of faults 37
13. Taking out of operation, storage and disposal 42
13.1 Taking the control unit out of operation
and disassembly 42
13.2 Storage 42
13.3 Disposal of waste 42
14. Brief instructions 43
15. Connection overview and DIP switches 47
1. About this Installation and Operating Manual 4
1.1 Storage and circulation of the Installation and
Operating Manual 4
1.2 Important for translations 4
1.3 Description of the product type 4
1.4 Target groups of the Installation and Operating
Manual 4
1.5 Explanation of warning symbols and notes 4
1.6 Special warning symbols and mandatory signs 5
1.7 Information regarding the depiction of text 5
1.8 Intended use 6
1.9 Improper use 6
1.10 Qualifications of personnel 6
1.11 Information for the user 7
2. General safety instructions 8
2.1 Basic safety instructions for operation 8
2.2 Additional safety information for the radio remote
control 9
2.3 Information on operation and remote control 9
2.4 Simplified Declaration of Conformity 9
3. Description of function and product 10
3.1 Safety equipment 10
3.2 Product designation 10
3.3 Scope of delivery 11
3.4 Dimensions 11
3.5 Technical data 12
3.6 Overview of connection options 13
3.7 Door types 13
4. Tools and protective equipment 14
4.1 Required tools 14
4.2 Personal protective equipment 14
5. Declaration of Conformity 15
6. Installation 16
6.1 Important information on installation 16
6.2 Installing the control unit 16
7. Electrical connection 18
7.1 Important information on electrical connection 18
7.2 Connection options 19
7.3 Slots for accessories/fuses 20
7.4 Additional information on connections
and accessories 21
7.5 SOMlink 21
7.6 Mains connection 21
7.7 Information on connecting accessories 21
8. Initial operation 22
8.1 DIP switch initial position 22
8.2 Checking the direction of running 22
8.3 Setting the motor limit switches 23
8.4 Closing the housing cover 23
8.5 Setting the run time (run time monitoring) 23
8.6 DIP switches 24
8.7 Explanation of the radio channels 26
8.8 Selection of the radio channels 26
To Next Page
Loading...
Need help?
General
