SOMMER RDC Vision+ User Manual

34
11.1 Safety instructions for
maintenance and care
DANGER
Danger due to electric current!
Contact with live parts may result in electric
currentowingthroughthebody.Electric
shock, burns, or death may result.
► Before commissioning, it is essential to
ensurethatthespecicationsonthetype
plates of the operator and the control unit
match.
► Read and observe the safety information
and warnings on page 8.
WARNING
Danger of crushing and shearing!
If the door moves and there are persons
or animals in the movement area, crushing
and shearing injuries may be caused by the
mechanism and safety edges of the door.
► Only operate the door when you have
a direct view of the movement area.
► The danger zone must be visible during
the entire door operation.
► Always keep the moving door in sight.
► Keep persons and animals away from
the danger zone.
► Never stand under the opened door.
► The installation of a photocell is
mandatory for operation with automatic
closing.
11. Maintenance and care
NOTE
Objects in the movement area of the door
may be jammed and damaged.
Objects must not be in the range of
movement of the door.
NOTE
The use of unsuitable cleaning agents may
damage the surface of the control unit.
Clean the control unit with a damp, lint-free
cloth only.
INFORMATION
Keep this installation and operating manual
accessible to all users at the place of use.

SOMMER RDC Vision+ Specifications

General

Brand	SOMMER
Model	RDC Vision+
Category	Control Unit
Language	English