SOMMER RDC Vision+ User Manual

31
10.1 Safety information on operation
DANGER
Danger due to electric current!
Contact with live parts may result in electric
currentowingthroughthebody.Electric
shock, burns, or death may result.
► Before commissioning, it is essential to
ensurethatthespecicationsonthetype
plates of the operator and the control unit
match.
► Read and observe the safety information
and warnings on page 8.
WARNING
Danger caused by young children
operating the door!
If the door system is operated by young
children, there is a danger of them or other
persons being trapped under the door.
Severe or fatal injuries may result.
► Commanddevicesinaxedposition,
including the control unit itself, must be
mounted at a height of at least 1.5 m.
Danger of crushing and shearing!
If the door moves and there are persons
or animals in the movement area, crushing
and shearing injuries may be caused by the
mechanism and safety edges of the door.
► Only operate the door when you have
a direct view of the movement area.
► The danger zone must be visible during
the entire door operation.
► Always keep the moving door in sight.
► Keep persons and animals away from
the danger zone.
► Never stand under the opened door.
► The installation of a photocell is
mandatory for operation with automatic
closing.
10. Operation
NOTE
Objects in the movement area of the door
may be jammed and damaged.
Objects must not be in the range
of movement of the door.
INFORMATION
Keep this installation and operating manual
accessible to all users at the place of use.
10.2 Operation using the button pad
in the housing cover
OPEN button
Stop button
CLOSE button
NOTE
The door is stopped immediately if any
button is pressed during door movement
(panic function)*
* Does not apply to automatic closing

SOMMER RDC Vision+ Specifications

General

Brand	SOMMER
Model	RDC Vision+
Category	Control Unit
Language	English