SOMMER RDC Vision+ User Manual

4
1. About this Installation and Operating Manual
1.1 Storage and circulation of the
Installation and Operating Manual
Read this Installation and Operating Manual carefully
and completely before installation, commissioning and
operation and also before removal. Follow all warnings
and safety instructions.
Keep this Installation and Operating Manual accessible
at all times at the place of use.
A replacement for the installation and operating manual
can be downloaded from SOMMER Antriebs- und
Funktechnik GmbH at:
www.sommer.eu
During the transfer or resale of the operator to third parties,
the following documents must be passed on to the new
user:
• this installation and operating manual
• documentsrecordingretrottingandrepairs
• proof of regular care, maintenance and testing
• Declaration of Conformity and Handover Report
1.2 Important for translations
This original Installation and Operating Manual was written
in German. The other available languages are translations
of the German version. You can get the original Installation
and Operating Manual by scanning the QR code:
http://som4.me/orig-rdcvision-plus-reva
For other language versions, see:
www.sommer.eu
1.3 Description of the product type
This product is a control unit for motor-operated roller
doors. It has been constructed according to state-of-the-art
technology and recognised technical regulations.
1.4 Target groups of the Installation
and Operating Manual
The installation and operating manual must be read and
observed by everyone assigned with one of the following
tasks or using the device:
• Installation
• Initial operation
• Settings
• Usage
• Care and maintenance
• Testing
• Troubleshooting
• Disassembly and disposal
1.5 Explanation of warning symbols
and notes
The warnings in this installation and operating manual
are structured as follows.
Hazard
symbol
Signal word
Type and source of hazard
Consequences of the hazard
► Preventing/avoiding the hazard
The hazard symbol indicates the hazard. The signal word
is linked to a hazard symbol. The hazard is classified into
three classes depending on its danger level:
DANGER
WARNING
CAUTION
There are three different classifications of hazards.
DANGER
Describes an immediate danger that may
lead to serious injury or death
Describes the consequences of the
danger to you or other persons.
► Preventing/avoiding the hazard

SOMMER RDC Vision+ Specifications

General

Brand	SOMMER
Model	RDC Vision+
Category	Control Unit
Language	English