Need help?Do you have a question about the Sonance Navigator K2 and is the answer not in the manual?
General| Type | Keypad |
|---|---|
| Model | Navigator K2 |
| Brand | Sonance |
| Current Draw | 50mA |
| Button Configuration | 6 buttons |
Details the minimum system requirements for the Navigator K2 Manager software.
Diagram and description of the Navigator K2 keypad's front and back components.
Step-by-step guide for installing the Navigator K2 Manager software.
Steps for managing pages within the Navigator K2 interface.
Procedures for creating and removing buttons on the touchscreen.
Guide for configuring PC and keypad communication settings.
Methods for managing existing pages, including renaming and copying.
Instructions for adding or removing frames within a page layout.
Steps for combining pages from different project files.
Techniques for selecting and repositioning buttons on the interface.
Procedures for managing buttons via the clipboard.
Methods for adjusting button dimensions and adding custom graphics.
Detailed guide on creating and editing macros for sequential commands.
Steps for adding, inserting, or deleting commands within a macro.
Steps for quickly creating channel preset macros.
Instructions for creating and modifying vertical lists for data.
Guide for configuring overall keypad settings and properties.
Configuration options for power, miscellaneous, and security settings.
Explanation of assigning global status to hard buttons for consistent operation.
Setup for synchronizing multiple keypads for consistent behavior.
Guide for modifying individual button attributes.
Configuration options for button states and infrared command behavior.
Procedure for editing attributes of several buttons simultaneously.
Utility for finding and replacing IR codes within the project.
Methods for monitoring memory and creating self-downloading executables.
Instructions for updating the keypad's internal firmware.
Compares and contrasts custom buttons and bitmaps for graphical elements.
Description of the interfaces for creating custom graphics.
Explanation of the drawing tools available in the image editors.
Explains the two types of command libraries used by the software.
Detailed guide on managing IR codes for remote files.
Troubleshooting steps for issues related to PC and keypad communication.
Solutions for macro command issues and infrared signal problems.
Guidance on contacting support and information needed for assistance.
Instructions and policies for shipping the unit for repair.
To Next Page
